Permissions required for the app to function properly

LinkPOS app permissions

The LinkPOS app asks for the minimum required permissions for it to function properly. You must enable all of them in order for the system to run.

To check the permissions open the iPad settings app

Then scroll down and select the LinkPOS app. The permissions will appear in the upper right corner of the screen.

The Local Network permission must be turned on. Without it the app will not be able to communicate with any other devices on the network.

Please turn all the permissions on as shown:

• Location is used to geo-fence the app for online ordering
• Bluetooth is used for Bluetooth credit card devices
• Local Network is required for the device to communicate with other devices on the network - printers, PAX devices, etc.
• Camera is used to scan QR codes on the receipts

WiFi settings

In order to keep the devices connected to each other over the local network the IP addresses of the devices need to remain consistent. In order to prevent the iPad from changing its IP address frequently, you need to turn off the Private WiFi Address option.

Open the iPad settings app

Select your local network from the WiFi section in the iPad settings app

Then turn off the Private Wi-Fi Address option