PAX Close Batch - Revision history

David Ashton: Added errors section

2024-01-25T18:39:49Z

Added errors section

← Older revision		Revision as of 12:39, 25 January 2024
Line 46:		Line 46:

	There is a batch for each PAX device you have. You will need to perform these actions on each device to close all transactions.		There is a batch for each PAX device you have. You will need to perform these actions on each device to close all transactions.

			== Errors ==

			* If you close the batch and there aren't any transactions in the batch you may get this error:

			[[File:No transactions.jpg\|frameless]]

			* If there are transactions that cannot be completed the batch may fail to close and it will display the error

David Ashton: added more dialog screenshots

2024-01-25T18:29:09Z

added more dialog screenshots

← Older revision		Revision as of 12:29, 25 January 2024
Line 21:		Line 21:
	[[File:Batch_close.jpg\|frameless]]		[[File:Batch_close.jpg\|frameless]]

	~~If you don't have any paper in~~ the ~~on-device printer it will ask you if you want to continue without printing. Some people intentionally remove the paper so it won't print the report.~~		Touch OK from the Close W/Untipped dialog

	After the batch closes it will print out a summary with all of the batch transactions. If you don't want to print this report, first remove the paper from the back of the device before executing the Batch Close command.		[[File:Close w untipped.jpg\|frameless]]

			If you don't have any paper in the on-device printer it may ask you if you want to continue without printing. Choose yes or ok. Some people intentionally remove the paper so it won't print the report.

			It should then show a processing dialog. The dialog may go away and it may take a long time (minutes) to close all the transactions.

			[[File:Close Batch Processing.jpg\|frameless]]

			After the batch closes it will print out a summary with all of the batch transactions which can be very long. If you don't want to print this report, first remove the paper from the back of the device before executing the Batch Close command. If you don't print the report then it will show a success dialog when the batch finishes closing otherwise it will just print the report.

			[[File:Batch close success.jpg\|frameless]][[File:Batch report.jpg\|frameless\|400x400px]]

	Close the BroadPOS app by selecting the circle button at the bottom of the screen		Close the BroadPOS app by selecting the circle button at the bottom of the screen

			[[File:Home button.jpg\|frameless]]

	Open the LinkPOS app and you may continue processing		Open the LinkPOS app and you may continue processing

			[[File:Linkpos app.jpg\|frameless]]



	There is a batch for each PAX device you have. You will need to perform these actions on each device to close all transactions.		There is a batch for each PAX device you have. You will need to perform these actions on each device to close all transactions.

David Ashton at 15:44, 31 March 2023

2023-03-31T15:44:47Z

← Older revision		Revision as of 09:44, 31 March 2023
Line 1:		Line 1:
	Each PAX device has its own batch. The typical setup for a PAX device is to automatically batch during the night at around 2 am.		Each PAX device has its own batch. The typical setup for a PAX device is to automatically batch during the night at around 2 am. In order for the PAX device to batch automatically the device must be turned on and the BroadPOS app must be running. The BroadPOS app has the name of your processor on it so it should be something like Vantiv or TSYS but the icon should say PAX BroadPOS. Touch this app to start it and then leave it running in the background.[[File:Broadpos_app.jpg\|frameless\|77x77px]]

			== Manually close the batch ==
	If you want to close the batch manually or need to close the batch at a specific time follow these instructions to close the batch:		If you want to close the batch manually or need to close the batch at a specific time follow these instructions to close the batch:

David Ashton at 23:20, 23 July 2022

2022-07-23T23:20:16Z

← Older revision		Revision as of 17:20, 23 July 2022
Line 5:		Line 5:

	Touch the circle button at the bottom of the PAX device screen to return to the home page.		Touch the circle button at the bottom of the PAX device screen to return to the home page.
	[[File:~~Home button~~.jpg\|~~none\|thumb~~]]
			[[File:Home_button.jpg\|frameless]]

	Select the BroadPOS app. The icon of this app will have PAX BroadPOS in the image. The name of the app will be your processor - Vantiv, TSYS, Chase, Omaha, etc.		Select the BroadPOS app. The icon of this app will have PAX BroadPOS in the image. The name of the app will be your processor - Vantiv, TSYS, Chase, Omaha, etc.
	[[File:~~Broadpos app~~.jpg\|~~none\|thumb~~\|77x77px]]
			[[File:Broadpos_app.jpg\|frameless\|77x77px]]

	Select the FUNC menu and then select Batch		Select the FUNC menu and then select Batch
	[[File:~~Func batch~~.jpg\|~~none\|thumb~~]]
			[[File:Func_batch.jpg\|frameless]]

	Touch Batch Close.		Touch Batch Close.
	[[File:~~Batch close~~.jpg\|~~none\|thumb~~]]
			[[File:Batch_close.jpg\|frameless]]

	If you don't have any paper in the on-device printer it will ask you if you want to continue without printing. Some people intentionally remove the paper so it won't print the report.		If you don't have any paper in the on-device printer it will ask you if you want to continue without printing. Some people intentionally remove the paper so it won't print the report.

David Ashton at 23:50, 22 July 2022

2022-07-22T23:50:36Z

← Older revision		Revision as of 17:50, 22 July 2022
Line 1:		Line 1:
	~~Touch the circle button at the bottom of the~~ PAX device ~~screen to return~~ to the ~~home page~~.		Each PAX device has its own batch. The typical setup for a PAX device is to automatically batch during the night at around 2 am.

	~~Select~~ the ~~BroadPOS app. The icon of this app will have PAX BroadPOS in~~ the ~~image. The name of~~ the ~~app will be your processor - Vantiv, TSYS, Chase, Omaha, etc.~~		If you want to close the batch manually or need to close the batch at a specific time follow these instructions to close the batch:

	~~Select the FUNC menu~~

	Touch Batch		Touch the circle button at the bottom of the PAX device screen to return to the home page.
			[[File:Home button.jpg\|none\|thumb]]
	Touch Batch Close. If you don't have any paper in the on-device printer it will ask you if you want to continue without printing. Some people intentionally remove the paper so it won't print the report.		Select the BroadPOS app. The icon of this app will have PAX BroadPOS in the image. The name of the app will be your processor - Vantiv, TSYS, Chase, Omaha, etc.
			[[File:Broadpos app.jpg\|none\|thumb\|77x77px]]
			Select the FUNC menu and then select Batch
			[[File:Func batch.jpg\|none\|thumb]]
			Touch Batch Close.
			[[File:Batch close.jpg\|none\|thumb]]
			If you don't have any paper in the on-device printer it will ask you if you want to continue without printing. Some people intentionally remove the paper so it won't print the report.

	After the batch closes it will print out a summary with all of the batch transactions. If you don't want to print this report first remove the paper from the back of the device before executing the Batch Close command.		After the batch closes it will print out a summary with all of the batch transactions. If you don't want to print this report, first remove the paper from the back of the device before executing the Batch Close command.

	Close the BroadPOS app by selecting the circle button at the bottom of the screen		Close the BroadPOS app by selecting the circle button at the bottom of the screen

David Ashton: Initial creation

2022-07-22T21:22:17Z

Initial creation

New page

Touch the circle button at the bottom of the PAX device screen to return to the home page.

Select the BroadPOS app. The icon of this app will have PAX BroadPOS in the image. The name of the app will be your processor - Vantiv, TSYS, Chase, Omaha, etc.

Select the FUNC menu

Touch Batch

Touch Batch Close. If you don't have any paper in the on-device printer it will ask you if you want to continue without printing. Some people intentionally remove the paper so it won't print the report.

After the batch closes it will print out a summary with all of the batch transactions. If you don't want to print this report first remove the paper from the back of the device before executing the Batch Close command.

Close the BroadPOS app by selecting the circle button at the bottom of the screen

Open the LinkPOS app and you may continue processing

There is a batch for each PAX device you have. You will need to perform these actions on each device to close all transactions.